Calculator cluster

Resin 3D printing

SLA/DLP cost, exposure, lift settings, mix ratios, vat volume and degassing time.

• Resin 3D printing

  Bottom / Burn-in Layer Exposure

  Calculate MSLA/SLA burn-in exposure from normal layer time, a multiplier and bottom-layer count. Outputs per-layer seconds, total base time and the ratio used.

• Resin 3D printing

  Exposure Time Scaling Calculator

  Scale SLA/MSLA cure time when you change layer height or move between RGB and mono LCDs. First-order guess, then print a validation matrix.

• Resin 3D printing

  Resin Lift Speed and Distance

  Heuristic MSLA lift distance and lift/retract speeds from LCD diagonal in inches, resin viscosity class and FEP condition. Outputs millimetres and mm/min.

• Resin 3D printing

  Resin Degassing Time Estimator

  Estimate how long bubbles take to rise out of a resin vat using Stokes’ law, viscosity at temperature, vat depth and bubble diameter. Outputs rise speed and minutes.

• Resin 3D printing

  Resin Mix Ratio Calculator

  Linear-blend two resins to a target Shore D (or any linear property). Enter component properties, target and total millilitres to get each volume and percent.

• Resin 3D printing

  Resin Print Cost Estimator

  Estimate SLA/DLP print cost from resin volume, bottle price and LCD screen degradation per hour. Toggle millilitres and US fluid ounces.

• Resin 3D printing

  Resin Volume to Weight Converter

  Convert SLA slicer volume in millilitres to grams using typical specific gravity for standard, tough, water-washable, ABS-like and castable resins.

• Resin 3D printing

  Vat Volume Checker

  Check whether the resin in an MSLA vat covers a sliced job plus a safety margin. Rectangular vat millilitres from L×W×fill height, remaining, enough flag and shortage.